25 grams JePe glass tissue 5m x 1,27m
5 meters long (127 cm! wide) 25gr/m2 glass tissue
Categories
5 meters long (127 cm! wide = 6,35m2) 25gr/m2 glass tissue for finishing Foam models with PU-Finish (or Epoxy) .Easy to use on round shapes and other difficult shapes: this is JePe favourit glass! Much easier to use than the 49gr tisseu (and much lighter).
After hardening you can use water based acryl grounding, bring it on to your model with help of a textile roller. After drying you can use a finger tip full of 'easyfiller'to push into small pinholes and fill other cosmetic errors, than you do first sanding and model is sealed and smooth for final paint of your choice.
Total of 6,35 m2 is a good match for 500ml of PU resin (good for 2 models)
Weight and thickness table:
| type glass m2 | thickness | resin consumption m2 | total weight m2 | |
| 24 gr | 0,03mm | 20 gr | 45 gr | |
| 49 gr | 0,06mm | 39 gr | 88 gr |
If you use some 2,5 m2 on your model it will gain some 115 gram of weight + the acryl grounding/paintjob . Glassing with 25 gram is a light solution! See my Foam Finish Page
No customer comments for the moment.
Only registered users can post a new comment.
Cart
product (empty)