PU Finish for EPS Foam 1/2 Liter

PU Finish for EPS Foam 1/2 Liter

1/2 Liter of PU-EPS Finish for EPS (styrofoam)

More details


21.38EUR tax incl.

500 ml

500 ml can of PU waterbased PU-Finish for EPS(styrofoam) With this waterbased paint you can very easy cover your EPS model in 25 gram glass. It becomes nice hard and is still easy to sand, also you get a very liteweight finish. Do not use this waterbased PU-EPS on balsawood frames (use HT-2 Epoxy or PU-EPO for balsawood models!)
Just prepare EPS foam model with Easy filler and some sanding first, and than put dry parts of 25 gram glas on top of your model and paint them over with the PU Finish. Use plenty of paint and let it dry overnight, then do some light sanding.

Final Finish: use a textile paintroller with Acrylic grounding paint after drying you will find lots of small pinholes in the glas tissue and further small cosmetic errors. You can fill them with a fingertip of 'easy filler', let it dry 20 minutes and do sanding with some 180 grid paper(now your model is completely sealed and smooth and you can finish your model with paint of your choice).

For exort orders to US and other long distance it can be wise to order the smaller 250 ml Can so shipping weight of your model + small parts stays under 5kg to save shipping costs. For most countries in Europe we have no problem because weight limit is much higher than 5 kg (best log-inn and do a test order to see exact shipping costs)

FromTitleComment
07/18/2012 Allen P. Very goog product! First time I ordered and use this product and all I can say is its easy to use and very simple and make my models have a nice finish w/o using epoxy resin. Another thing is company has a very good service. I will order more from them. Excellent service!

Allen

Only registered users can post a new comment.

Cart  

No products

Shipping 0.00EUR
Total 0.00EUR

Check out

Free Prestashop Modules