JET90-8s 9 blade
9-blade JET90-8s Fan unit !
this is our 9 blade 90mm 8s Fan combination:
complete assembled/balanced super dynamic Fanunit by JePe
The faster spinning 9-blade high-pitch rotor(RPM at 4,2kgf is 37.300!) will not only bring you more speed but also produces same wanted 'turbine sound' as much lower RPM running 12 blade fans (9-blade high rpm = same frequency as lower rpm 12-blade) Both the JetFan 9-Blade rotor and the Fanhousing(with twisted & sharp shaped stators!) are made of strongest fibrefilled materials (much stronger than any! other injection molded Fan on the market) .
inclusive permanent mounted (low profile) heatsink + heat conducting silicone grease used + removable intake lip included
Japanese motor bearings!
Weight: 460 gram
Price is calculated with 50 minutes of professional assembling + balancing skills (each fanunit build for you by JePeJetMan himself! and no stagairs/no partimers!)
4,2 Kgf static testbench thrust at 81 Amps / 29,2V (2365 Watt) 1,76 gr/W
RPM at 4,2kgf is 37.300 ! the 9 blade JetFan rotor makes a turbine sound impression, it is made from strongest non flexing material (important if you run on high power).
Best nozzle diameter is 75mm
To keep current down at 8s we advise you to use only LOW-Timing (0 degree) mode of your motorcontroller !
No customer comments for the moment.
Only registered users can post a new comment.